Submersible Single-phase Portable Drainage Pumps HS3.75SL / HSZ3.75SL

The HS3.75SL & HSZ3.75SL model pumps are submersible single-phase portable drainage pumps that come with high volume drainage capability.
These pumps are a low head, high volume drainage type launched under Tsurumi’s proudly best-selling HS-series. With high volume drainage performance, they are suited to specifically meet the needs of the rental market, as well as the civil engineering and the construction market.
As with the existing HS-series units, these operator-friendly submersible pumps are compact and lightweight, i.e. highly portable, and offer improved maintainability.
With their wear-prone parts constructed of wear-resistant materials, they are also superbly durable. Moreover, the shaft incorporates Tsurumi’s original agitator to prevent air lock as occasionally seen in vortex pumps and semi-vortex pumps. The agitator also stirs slurry efficiently.
The HSZ-series is made as a simple float switch-equipped automatic model to prevent dry-running operation and to reduce power consumption.

Features

  • 1. Anti-wicking Cable Entry

    Prevents water incursion due to capillary action should the cable sheath be damaged or the end of cable submerged. Also prevents moist air from infiltrating the motor housing and condensation from forming inside the housing due to temperature differences between the housing and outside air.

  • 2. Dual Inside Mechanical Seals with Silicon Carbide Face

    Eliminates problems like spring failure and ensures a long service life. Isolated in the oil chamber where a clean, non-corrosive and abrasion-free lubricating environment is maintained. The silicon carbide provides 5 times higher corrosion, wear and heat resistance than the tungsten carbide.

  • 3. Oil Lifter

    Provides lubrication and cooling of the seal faces down to 1/3 of normal oil level, thus maintaining a stable shaft sealing effect and prolonging seal life longer. The Oil Lifter is Tsurumi original design.

  • 4. V-ring (0.75kW only)

    Used as a “Dust Seal,” they protect the mechanical seal from abrasive particles.

  • 4. Agitator

    Prevents the air lock that tends to take place on vortex or semi-vortex pumps.

Performance Curves

Standard and Automatic models have the identical performance.

  • 50Hz
  • 60Hz

Model Selection

Discharge
Bore
mm
Model Motor
Output
kW
Phase Starting
Method
Solids
Passage
mm
Dry Weight
kg
Cable
Length
m
Standard Automatic Standard Automatic
50 HS2.4S HSZ2.4S 0.4 Single Capacitor Run 7 11.3 11.3 5
50 HS2.75S HSZ2.75S 0.75 Single Capacitor Run 7 16.4 16.4 5
80 HS3.75S HSZ3.75S 0.75 Single Capacitor Run 7 16.8 16.8 5
80 HS3.75SL HSZ3.75SL 0.75 Single Capacitor Run 7 19.6 19.6 5

・Male threaded coupling for pipe connection available on special request

・Weights excluding cable