PLS
Horizontal Resin-made Pumps with Vortex Impeller
| Discharge Bore(mm) | 50 |
|---|---|
| Motor Output(kW) | 0.15 - 0.75 |
The PLS-series is a submersible horizontal semi-vortex pump designed for handling wastewater and liquid carrying small solid matters. It is made of resin and 304 stainless steel and is excellent in corrosion-resistance. Because of the horizontal design, the continuous running water level is lower than conventional vertical types, and it can be used in a shallow or narrow sump.
Liquid paraffin is used for the lubricating oil, which widens the application of the pump to decorative waterfalls, fishponds, aquaculture, etc.
Performance Curves
Model Selection
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method | Solids Passage (mm) |
|---|---|---|---|---|---|
| 50 | 50PLS2.15S | 0.15 | 1-phase | Capacitor Run | 38(10)* |
| 50 | 50PLS2.4S | 0.4 | 1-phase | Capacitor Run | 24(10)* |
| 50 | 50PLS2.75S | 0.75 | 1-phase | Capacitor Run | 24(10)* |
* Figure in ( ) shows the solids passage of the pump with a strainer. The Strainer is supplied as a standard accessory.
